Tag: Tutorial

  • Bonnie’s Two Piece Tote Bag

    Photos + Tutorial by Bonnie Kaye Whitfield

    You are not going to believe how quick and easy this tote bag is to make. I first discovered this tote bag design after getting one with a purchase from a major retailer. It is simply constructed of two pieces of fabric. Brilliant.

    Blog_4_Pic_11

    You will need:
    |
    ❖ 2 rectangular pieces of fabric

    ❖ scissors or rotary cutter to customize fabric sizes

    ❖ pins

    ❖ serger and/or sewing machine

    ❖ iron (optional)

    Blog_4_Pic_1

    Your two pieces of fabric will determine your overall shape and size of the tote. One piece will serve as the body of the tote and should be wider and shorter. The second piece of fabric will serve as the sides and the strap of the tote and should be thinner (depends on the depth you wish your tote to have) and much longer. For the body of my tote, I’m using some scrap fabric from my studio and you can see that I sewed them together in order to have a large enough piece – so feel free to hinge pieces of fabric together if needed.

    Blog_4_Pic_2

    Take the two short ends of your fabric piece that will serve as the body of the tote. Iron and pin a 1⁄2” hem and sew. This will create a more finished look for the top edges of your tote.

    Blog_4_Pic_3

    Grab a bunch of pins and your two pieces of fabric and take a seat. Fold the body of the tote, so that the nice sides are facing each other on the inside. You’ll be pinning your tote together from the inside.

    Blog_4_Pic_4 Blog_4_Pic_5

    Start by pinning the long piece of fabric to the bottom of the body piece, matching the center/bottoms. Keep pinning as you go around the corner edge of the long piece of fabric. Stop when you get to the top edge of the tote. Repeat on the other side of the tote, starting at the bottom/center of the bag again.

    Blog_4_Pic_7 Blog_4_Pic_6

    Once the two pieces have been completely pinned together, you are ready to sew. You should also be able to get a pretty good idea of the overall size and shape of your tote at this point.

    Blog_4_Pic_8

    I’m using a serger, but you can also simply use a sewing machine. First, begin by sewing the two bottom edges of the two sides. The length of the stitch will depend on the width of your strap.

    Blog_4_Pic_9

    Next, you’ll do two long stitches and that’s it! Begin at one end of the tote and sew over the strap, until you get to the other side of the bag. Repeat on the other side.

    Blog_4_Pic_10

    Turn the bag inside out and you’ll now have a splendid new tote, perfect for all your toting needs.

    Blog_4_Pic_12

    ———————————————————————————————————-

    Bonnie Kaye Whitfield designs and screen prints home textiles + paper goods under the name, Bonnie Kaye Studio. Products are created to inspire memories at home and around the table.  A donation is made with every purchase to help feed hungry Americans. www.BonnieKayeStudio.com

  • Bonnie’s Insta-Notebook Tutorial

    Photos + Tutorial by Bonnie Kaye Whitfield

    If you’re like me, you can never have too many notebooks.  Small notebooks are especially helpful for on-the-go notetaking or making quick grocery lists.  Here’s a quick Japanese-stab binding technique that will get you jotting inside in lickety split.

    Bonnie_Blog2_Pic8

    You will need:

    • decorative cover paper (I’m using my screen-printed wrapping sheets, available for sale at Art Star)
    • filler paper for the inside (I’m using kraft paper sheets, but simple copy paper is fine, just nothing too thick)
    • bonefolder (optional)
    • needle
    • thread, ideally for bookbinding
    • awl, a tool used for piercing holes (could probably also use an ice pick or ceramic needle tool)
    • piece of cardboard
    • scissors
    • pen or pencil to mark holes

    Bonnie_Blog2_Pic1

    Once you’ve gathered your materials, you’ll need to cut your papers to the size that you want the notebook.  I cut mine to 6×9”, with the filler paper cut ⅛ shorter on both sides so that they don’t poke outside of the cover once folded.  If you cut your paper to 6×9”, you’ll end up with a 6×4.5” notebook.

    Bonnie_Blog2_Pic2

    Fold both your cover and filler sheets of paper in half.  Use a bonefolder if you have one to firmly crease the fold.  You can also just use the back of your fingernail or another smooth, blunt tool.  Next, you’ll mark three dots for your holes along the spine/folded edge of the book.  Mark the holes in a line at least a ½ an inch from the spine and tops and bottoms of the book.

    Bonnie_Blog2_Pic3

    Using your awl, you’ll next pierce the holes, prior to sewing.  This is going to make sewing a lot easier.  I like to use a piece of cardboard or old magazine underneath the book while making the holes.  You can also use a small hole punch.  Next, measure your thread at least 3 to 4 times the length of your spine and cut.  Thread the needle, but do not make any knots.

    Bonnie_Blog2_Pic4

    This Japanese stab-binding stitch might look complicated at first, but trust me, it’s quite easy!  You really flow through the stitches starting at the top of the book and working your way down.

    1. Start sewing from the backside of the book, in the top hole.
    2. Leave about a 2” tail of thread and hold it with your thumb.  You’ll be able to let go after the next stitch or two.  (The only knot you make for this book is done at the very end.)
    3. Thread over and around the top of the book and back through the top hole from the back.
    4. Thread over and around the side of the book and back through the top hole from the back of the book.
    5. Thread down to the second hole.  The needle will now be on the backside of the book.
    6. Thread over and around the side of the book, going through the second hole again from the front.  Your needle will then still be on the backside of the book.

    Bonnie_Blog2_Pic57.  From the back, you’ll thread through the third hole at the bottom.  You’ll now be                         back on the frontside of the book.

    8. Thread over and around the bottom edge of the book, going back through the                                 bottom hole from the backside.

    9.  Thread over and around the side edge of the book, going back through the bottom                       hole from the backside.

    10.  Thread back up to the middle hole.  Your needle and thread will now be on the                              backside of the book.

    11.  Flip your book over.  It should look like this.

    12.  Lastly, remove the needle and tie the two loose ends together.  Cut threads, leaving                    about an ½” tail.  Voila!

    Bonnie_Blog2_Pic7

    Once you’ve tied your knot, you may want to crease or score the inside pages at the binding so that the book opens more fully.  Up to you.  Also, variations include making your holes larger and sewing with a thicker thread-like material, such as cord (pictured with the pink notebook), ribbon or yarn.

    You now have a notebook that you can take and use anywhere.

    _____________________________________________________________

    Bonnie Kaye Whitfield designs and screen prints home textiles + paper goods under the name, Bonnie Kaye Studio.    www.BonnieKayeStudio.com

The owner of this website has made a commitment to accessibility and inclusion, please report any problems that you encounter using the contact form on this website. This site uses the WP ADA Compliance Check plugin to enhance accessibility.